fuel filter relocation kit
#2
I put a FASS 150 on my tuck which has the water seperator and fuel filter on the lift pump assembly block. I then just completely removed the stock filter assembly altogether. I took a piece of 1/2" ID stainless steel tubing and put a 180 U-Bend in it and just hose-clamped it in with some fuel hose. It is a temp fix until I take all the piping off the top of the block and just go straight to the CP3. I am waiting until I do duel CP3's to remove all of the piping on top of the block.
Thread
Thread Starter
Forum
Replies
Last Post
RatsMC
Chevy/GMC 6.2L and 6.5L
19
05-04-2015 05:25 PM