Looking at 2001 d-max with 215,000 miles. input?
#12
Seafoam is a bad idea in HPCR engines... I'd never run a solvent through mine!! if any thing i would use some standadyne additive, but never ever seafoam! especially in an LB7 where the injectors are easily harmed
#13
A bottle of it in the tank will not hurt anything. There's always those people who are scared of it, but have yet to hear about one case where seafoam, when used correctly, has harmed an engine. Only possitive feedback from it. Dump some in the tank and you will notice a difference. Used it in my cummins and i kid you not, it was noticably quieter after about 100 miles. Google "seafoam in duramax" and you'll see all the possitive comments.
#14
#15
Join Date: Dec 2010
Location: Fool's Golden State
Posts: 1,190
Likes: 0
Received 113 Likes
on
109 Posts
so what does Seafoam actually clean? what deposits are going to be in the injectors that seafoam can remove. seems to me with the tolerances of today's high performance CR systems, any contaminants that seafoam can remove is going to cause serous injector issues. if it is the outside of the injectors or in the cylinders then water injection is best for that.
i know that one time i mistakenly put several gallons of E85 in my tank. all of the alcohol whent to the top of the diesel and when i ran out of diesel it started to run rough and smoke a lot. after i got rid of the E85 and refilled with diesel it ran better then before. seems to me that there must be some truth to injector cleaners. as to which ones work is the question.
i know that one time i mistakenly put several gallons of E85 in my tank. all of the alcohol whent to the top of the diesel and when i ran out of diesel it started to run rough and smoke a lot. after i got rid of the E85 and refilled with diesel it ran better then before. seems to me that there must be some truth to injector cleaners. as to which ones work is the question.
#16
#17
Thread
Thread Starter
Forum
Replies
Last Post
sulfurburner
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
10-17-2014 12:46 PM