Chevy/GMC Duramax 01-04 LB7 Discussion of Chevy and GMC Trucks with LB7 Duramax Turbo Diesel Engines

Changing a Fuel Filter

Thread Tools
 
Search this Thread
 
Old Sep 6, 2009 | 06:33 PM
  #1  
Trucks Are For Girls!!!'s Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2009
Posts: 26
Likes: 1
From: Arizona
Default Changing a Fuel Filter

IS there anything special I have to do before I replace my fuel filter. Or do I just unscrew it and then press on the top to prime it?
 
Reply
Old Sep 6, 2009 | 06:43 PM
  #2  
wildbill's Avatar
BOMBARDIER
Joined: Jul 2007
Posts: 12,809
Likes: 668
From: Billlings, MT
Default

Be sure to clean the water in fuel sensor.
 
Reply
Old Sep 6, 2009 | 06:48 PM
  #3  
Diesel-N-Dust's Avatar
Diesel Bomber
Joined: Apr 2007
Posts: 1,283
Likes: 58
From: Cypress, Texas
Default

Unplug the wif sensor first. Sometimes it is easier to remove the inner fender liner. It is on my truck anyway.

Danny has a good write-up here:

https://www.dieselbombers.com/chevy-...placement.html
 
Reply
Old Sep 6, 2009 | 06:48 PM
  #4  
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

unscrew the bleed screw too to make the pumping easier.
 
Reply
Old Sep 6, 2009 | 06:54 PM
  #5  
Diesel-N-Dust's Avatar
Diesel Bomber
Joined: Apr 2007
Posts: 1,283
Likes: 58
From: Cypress, Texas
Default

Naw I never touch my bleed screw. I run out of fuel all the time.
 
Reply
Old Sep 6, 2009 | 07:00 PM
  #6  
Trucks Are For Girls!!!'s Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2009
Posts: 26
Likes: 1
From: Arizona
Default

thanks guys I knew it was easy just wanted to make sure. would a dirty fuel filter make my engine light come on?
 
Reply
Old Sep 6, 2009 | 07:29 PM
  #7  
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

yes
 
Reply
Old Sep 6, 2009 | 07:34 PM
  #8  
Diesel-N-Dust's Avatar
Diesel Bomber
Joined: Apr 2007
Posts: 1,283
Likes: 58
From: Cypress, Texas
Default

Hey Danno. Let's go drink some Beer!
 
Reply
Old Sep 6, 2009 | 07:36 PM
  #9  
Trucks Are For Girls!!!'s Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2009
Posts: 26
Likes: 1
From: Arizona
Default

do I need to disconnect the batteries to reset the computer since my engine light is on?
 
Reply
Old Sep 6, 2009 | 08:13 PM
  #10  
wildbill's Avatar
BOMBARDIER
Joined: Jul 2007
Posts: 12,809
Likes: 668
From: Billlings, MT
Default

Because you replaced the filter, the light should go out after 5 good key trips.
 
Reply



All times are GMT -5. The time now is 11:08 AM.