Changing a Fuel Filter
IS there anything special I have to do before I replace my fuel filter. Or do I just unscrew it and then press on the top to prime it?
|
Be sure to clean the water in fuel sensor. :U:
|
Unplug the wif sensor first. Sometimes it is easier to remove the inner fender liner. It is on my truck anyway.
Danny has a good write-up here: https://www.dieselbombers.com/chevy-...placement.html |
unscrew the bleed screw too to make the pumping easier.
|
Naw I never touch my bleed screw. I run out of fuel all the time.:booo:
|
thanks guys I knew it was easy just wanted to make sure. would a dirty fuel filter make my engine light come on?
|
yes
|
Hey Danno. Let's go drink some Beer!:c:
|
do I need to disconnect the batteries to reset the computer since my engine light is on?
|
Because you replaced the filter, the light should go out after 5 good key trips.
|
All times are GMT -5. The time now is 10:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands