hows the truck commin ?? running yet ?

 

not yet hasn't been scanned i need to call him tomorrow and see when he'll be out

 

sweet ...

 

i cant reach him on the phone looks like ill be going down them 45 miles of dirt roads again when i get a chance to kidnap him haha what do you guys think about upgrading to HIDs?

 

just got back from his shop he''ll be here a 6 in the morning got the sheet printed 2004LB7 posted very helpful!

 

it is all in the housing and reflectors for which the HID bulbs are going into. if the reflectors were not designed for the HID bulbs then the beam pattern can look horrible and worse, blind someone. how do i know you ask??? well... i have tried it. from the stock housing to projector housing to aftermarket. all distort the beam so it shines into areas that it is not supposed to. i have finally got it to where it is "acceptable" but it still does not shine like i would like it to. if i adjust it to where i like it it shines into oncoming traffic.

now, if you find the housing that was made and certified for HIDs then that would likely be the best bet, but i couldn't afford them.

in closing, dont just put HID bulbs in housings not designed for them

my 2 cents

 

ok thanks for the info and this guy blew me off again (2ed) time

 

looks like she's getting a ride to the dealer this weekend wish for the best

 

I may have found a air leak when I prim it up and push the valve on the front of the engine fuel squirts out about 3-4 feet and watchomg the clear hose on the filter housing 1000s of little tinny bubbles go by super fast towards the engine

 

Oh Man ... So ? have you remidied the issue ???