vacuum line to injection pump?????
#1
vacuum line to injection pump?????
I am in the process of swapping a 84 6.2 into a 86 gasser. while digging around the engine labeling stuff for the swap i see there is a vacuum line from the vacuum pump that goes to some device that is attached to the injection pump. opposite side of the throttle then the line exits the device through a port just under the inlet and as far as i can tell it goes to the automatic transmission.
What is said device and what is its function?
What is said device and what is its function?
#3
#4
#5
The following users liked this post:
corvetteguy (07-25-2012)
#6
#7
tires
I was wanting to know if anybody could help me own an issue im having. I have a 04 f250 with the stock rims and the tires are 285/75/16 with bf all Terran tires. does anybody know what is the biggest rim and tire and offset i could go to with out putting a leveling kit or lifting my truck up. if you have pic that would help further thanks
#8
I was wanting to know if anybody could help me own an issue im having. I have a 04 f250 with the stock rims and the tires are 285/75/16 with bf all Terran tires. does anybody know what is the biggest rim and tire and offset i could go to with out putting a leveling kit or lifting my truck up. if you have pic that would help further thanks
Tire size calculator
#9
I am now a owner of 6.5L Turbo Diesel. The truck runs great but I have noticed that I only hear a faint turbo whistle for time to time. I have been doing some research online about the 6.5 Diesel's and still have a few questions if anyone would like to help me out.
I have found that the wastegate valve has a port for a vacuum line but I can not find any unattached lines. Where does it get the vacuum from? I have checked the turbo shaft and it is spins free & is tight. Any thoughts??
I have found that the wastegate valve has a port for a vacuum line but I can not find any unattached lines. Where does it get the vacuum from? I have checked the turbo shaft and it is spins free & is tight. Any thoughts??
Thread
Thread Starter
Forum
Replies
Last Post
DeLuzGN
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
03-17-2015 08:08 AM