Info on lifting my suburban
#1
Info on lifting my suburban
Hey guys
So Im thinking about lifting the burb 3'' suspension. To go this route will I need to alter brake lines/driveshaft ect or will the pinion angle of the shaft be ok after the lift? Anyone with a 3'' lift on their burban feel free to post pics on this thread please! Thanks in advance
So Im thinking about lifting the burb 3'' suspension. To go this route will I need to alter brake lines/driveshaft ect or will the pinion angle of the shaft be ok after the lift? Anyone with a 3'' lift on their burban feel free to post pics on this thread please! Thanks in advance
#2
#3
---AutoMerged DoublePost---
I sent rough counrty an email, they only list a suspenion lift kit for 6 lug burbs.
Last edited by urban-burban95; 01-13-2012 at 04:25 PM. Reason: Automerged Doublepost
#7
So my budget is tight, I'm leaning towards a 3" body lift. ive been researching a little and it seems like there are a bunch of modifications. Such as cutting the steering column and adding a 3" section, same with shift linkage. Also front and rear bumber brackets need modification. Fan shroud needs to be cut. Rad hoses and a/c lines need to be moved. all wires and metal lines need to be disconnected from frame. Ect Ect
---AutoMerged DoublePost---
what suspension kit would you guys recomend for a 3'' lift
---AutoMerged DoublePost---
what suspension kit would you guys recomend for a 3'' lift
Last edited by urban-burban95; 01-19-2012 at 04:57 PM. Reason: Automerged Doublepost
#8
rough country. i almost guarantee the 3 inch will fit 2500 or 1500. its super simple. not to expensive depends on the distributor. myn was just under 800 from a well priced place in winkler manitoba, that is canada. and thats with best shock you can get from them and add a leafs not blocks and a steering stabilizer. i fit 33 11.5's and i didn't even get my torsion keys in. on a 2500 I'm sure it would fit bigger.
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
12-03-2014 08:10 AM
760DAN
12 Valve 2nd Gen Dodge Cummins 94-98
5
10-31-2014 12:53 PM