Chevy/GMC 6.2L and 6.5L Discussion of Chevy and GMC Trucks with 6.2L and 6.5L Diesel Engines

need more HP

Thread Tools
 
Search this Thread
 
  #1  
Old 06-21-2011, 12:05 PM
jwyeater's Avatar
Diesel Fan
Thread Starter
Join Date: May 2011
Location: texas
Posts: 25
Likes: 0
Received 1 Like on 1 Post
Default need more HP

I do alot of pulling and was wanting to know how to get more HP out of this 6.5. I have a 93 gmc 3500 converted to flat bed,single axle 4 x 4, 5 speed. Seem to lose power on hills. Any suggestions?
 
  #2  
Old 06-21-2011, 02:55 PM
Join Date: Jun 2011
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Turn the pump up, put marine injectors in it. If you do that I would suggest putting water injection on it. Then put an exhaust temp gauge on it... That's a must!
 
  #3  
Old 06-21-2011, 08:51 PM
Woody35's Avatar
Diesel Bomber
Join Date: May 2008
Location: PA
Posts: 2,856
Received 124 Likes on 117 Posts
Default

marine injectors wont do much but turn the fuel screw but you need to up the boost a little bit and make your getting fuel to the ip
 
  #4  
Old 06-21-2011, 10:24 PM
Crazy's Avatar
Diesel Bomber
Join Date: Sep 2010
Location: Reddick,Fl.
Posts: 1,322
Likes: 0
Received 51 Likes on 45 Posts
Default

Originally Posted by Woody35
marine injectors wont do much but turn the fuel screw but you need to up the boost a little bit and make your getting fuel to the ip
X2
 
  #5  
Old 06-23-2011, 04:11 PM
jwyeater's Avatar
Diesel Fan
Thread Starter
Join Date: May 2011
Location: texas
Posts: 25
Likes: 0
Received 1 Like on 1 Post
Default

I have heard about turning pump up, but not sure how to do it. Also, was told , I would need to get more air into it. Then would need bigger exhaust. What is water injection?
 
  #6  
Old 06-24-2011, 02:00 PM
wpg6.5's Avatar
Diesel Wrench
Join Date: Sep 2010
Posts: 516
Likes: 0
Received 22 Likes on 21 Posts
Default

exhaust is a must, water meth works well too ive heard. turning the pump isnt too bad a few guys on here have detailed instructions on how to do it. and making an intake isnt too hard, a 3 inch 180 degree bend exhaust pipe will work, making one now. pulling the vacuum pump and making a manual boost controller helps, and a heath or walking j tune will really wake her up. i can walk 350 gas trucks all day. and i have 4 by
 
  #7  
Old 06-27-2011, 09:41 PM
palmer6.5td's Avatar
Diesel Fan
Join Date: Jan 2011
Posts: 55
Likes: 0
Received 0 Likes on 0 Posts
Default

Could a person get their stock injectors remanned to 2100 psi?
 
  #8  
Old 06-28-2011, 12:20 AM
Woody35's Avatar
Diesel Bomber
Join Date: May 2008
Location: PA
Posts: 2,856
Received 124 Likes on 117 Posts
Default

Originally Posted by palmer6.5td
Could a person get their stock injectors remanned to 2100 psi?
yeah it takes a few shims. got to get them pop tested though to make sure the nozzles are good first
 




All times are GMT -5. The time now is 04:43 AM.