could use a little advice, po238?
#12
HAHA LINES WERE CROSSED!!!
before i drove a half hour for another solenoid i had the brilliant idea of switching the lines on the solenoid and seeing if it worked and sure enough it did everything works great now the actuator rod was sucked in and is not moveable when the engine is running haha isnt that how it is though half the time when you get a vehicle you just have to fix what the previous owner tampered with
#14
yep thats how i have it just one more question for now
NOOOOOOO i messed up the title of that post. i just rechecked thats not how i have it, maybe our solenoids are located in different places mines by itself on the rear of driver side valve cover. but yea in my case the port closest to front of engine goes to actuator
so whats up with this whole harmonic balancer deal. am i supposed to change it before it causes my crank to crack??. havent really researched about it yet suppose i should...
so whats up with this whole harmonic balancer deal. am i supposed to change it before it causes my crank to crack??. havent really researched about it yet suppose i should...
Last edited by dirtrider5001; 03-11-2011 at 02:40 PM.
#15
#16
yea i think ur right
crossing the lines did open the wastegate but thats not how the lines go thanks for putting some sense into my head , so either its the solenoid being bad maybe or i read somewhere possible map sensor connection... ahhh thought i figured it out ill have to try that wd40 trick and tapping but i need to pick some up from the store along with some diff fluid for a front dif change
Last edited by dirtrider5001; 03-11-2011 at 04:05 PM.
#17
#18
#19
#20
Update Update! not good
well you dont know till you know right? and now i know that the problem isnt the vacuum solenoid cuz i just put a brand new one on there. The actuator rod is supposed to get sucked in when the truck is at idle correct?(i already sucked on the actuator and it pulled itself in didnt sound like it was leaking theres just no vaccumm coming on coming out the other end of the solenoid. and again its not the hose to actuator i already checked that. anyways im thinking maybe they crossed the wires when they put a new connector to the boost sensor on the intake but i dunno which wires go where? see the wires on the new connector are colored different. Im also thinking that this or whatever is causes my vac solenoid not to engage could also have something to do with the previous owners random stalling problem... Now i just have to figure out the problem....
---AutoMerged DoublePost---
the odd thing is that the vac solenoid seems to be buzzing like you said it should, the old solenoid buzzes too even more
---AutoMerged DoublePost---
im out there now looking over the entire wiring harness for a corroded wire
---AutoMerged DoublePost---
now im checking to see if this new sensor (that was already on the truck) is the correct boost sensor and not just a new map sensor from a car
---AutoMerged DoublePost---
im really starting to think bad pcm, when i put a test light to the vac sensor wires i get power but no ground, im not getting ground from the pcm, so why is pcm not sending signal? maybe bad pcm or??
---AutoMerged DoublePost---
THey had a map sensor in place of the boost sensor!!! I cant believe they did that. I bought this truck from a small shop!!!! ol !! i paid 100 for a cpu and when i was at the junkyard i asked if i might be able to get the map sensor and i got it i pulled it off the exact motor myself. when i went to put it onto mine it wouldnt go into the connector since remember i said they changed the connector. The origional map sensor on mine was brand new so i ASSUMED it was the right one. Well now i have a cuple hours of work to do taping up my wiring harness ect. The actuator works great i have the hoses on correct with the restricer outlet going to the pump every thing is great. And of course im using the origional cpu. i cant wait to feel the power of this beast a BIG thanks for everyone that put in there input
---AutoMerged DoublePost---
the odd thing is that the vac solenoid seems to be buzzing like you said it should, the old solenoid buzzes too even more
---AutoMerged DoublePost---
im out there now looking over the entire wiring harness for a corroded wire
---AutoMerged DoublePost---
now im checking to see if this new sensor (that was already on the truck) is the correct boost sensor and not just a new map sensor from a car
---AutoMerged DoublePost---
im really starting to think bad pcm, when i put a test light to the vac sensor wires i get power but no ground, im not getting ground from the pcm, so why is pcm not sending signal? maybe bad pcm or??
---AutoMerged DoublePost---
THey had a map sensor in place of the boost sensor!!! I cant believe they did that. I bought this truck from a small shop!!!! ol !! i paid 100 for a cpu and when i was at the junkyard i asked if i might be able to get the map sensor and i got it i pulled it off the exact motor myself. when i went to put it onto mine it wouldnt go into the connector since remember i said they changed the connector. The origional map sensor on mine was brand new so i ASSUMED it was the right one. Well now i have a cuple hours of work to do taping up my wiring harness ect. The actuator works great i have the hoses on correct with the restricer outlet going to the pump every thing is great. And of course im using the origional cpu. i cant wait to feel the power of this beast a BIG thanks for everyone that put in there input
Last edited by dirtrider5001; 03-15-2011 at 05:14 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Spaky6.0mudder
Ford Powerstroke 03-07 6.0L
7
08-03-2015 08:54 PM
jrsavoie
Chevy/GMC 6.2L and 6.5L
1
02-06-2015 09:44 PM