pmd
#2
here some info on testing but to me is know someone with6.5 let try they on your truck is the best way
what happen with your truck
www.AccurateDiesel.com - PMD Installation Instructions - Accurate Technical Services, LLC
---AutoMerged DoublePost---
should have ask you also are getting any codes IP most of the time will gave code and pmd most time don't gave you any codes
what happen with your truck
www.AccurateDiesel.com - PMD Installation Instructions - Accurate Technical Services, LLC
---AutoMerged DoublePost---
should have ask you also are getting any codes IP most of the time will gave code and pmd most time don't gave you any codes
Last edited by Crazy; 12-21-2010 at 08:39 PM. Reason: Automerged Doublepost
#3
Well it would run rough. Wouldn't idle right and now I can't get it to start back up at all
---AutoMerged DoublePost---
Their is no codes either that pop up. Check engine light doesn't come on. But I can't get my truck to start it only cranks.
---AutoMerged DoublePost---
Their is no codes either that pop up. Check engine light doesn't come on. But I can't get my truck to start it only cranks.
Last edited by thor08; 12-21-2010 at 08:42 PM. Reason: Automerged Doublepost
#5
#8
Their is no codes either that pop up. Check engine light doesn't come on. But I can't get my truck to start it only cranks.
are you getting fuel to the IP and have check LP to see if it working just cause you here it don't mean it working
Can u test the pmd? The pmd can stop it from starting if its bad?
the link i gave tell you how to test
yes PMD can stop it from starting
is you PMD on the pump , intake, or front bumper
#10
IP is Injector pump
ok open the T-valve and have someone turn the key on and fuel should pump out it
here other way but not sure if do it 96
Shown are jumpers on the 97+ Burb & truck makes it real easy to purge the filter after a replacement, also for force run to test lift pumps 12v to connector forces the run.
ok open the T-valve and have someone turn the key on and fuel should pump out it
here other way but not sure if do it 96
Shown are jumpers on the 97+ Burb & truck makes it real easy to purge the filter after a replacement, also for force run to test lift pumps 12v to connector forces the run.