Chevy/GMC 6.2L and 6.5L Discussion of Chevy and GMC Trucks with 6.2L and 6.5L Diesel Engines

performance on a 95 6.5 help?

Old Nov 9, 2010 | 01:57 PM
  #1  
65fourwheeler's Avatar
Thread Starter
|
Diesel Fan
Joined: Nov 2010
Posts: 11
Likes: 0
From: niagara falls, ny
Default performance on a 95 6.5 help?

i have a 95 chevy 6.5 1500 with the (s) engine in it i have new heads,new glow plugs, boost controller running 13 psi. ,40 hp injecter, # 9 resistor , (f) engine intake without egr., and (f) engine computer out of a 95 2500 and straight 4 inch exhaust with 6 inch tips, 2 1/2 cross over piple, k&n cold air intake. what else could i do 2 this truck 2 make more power it does have the power i want out of it HELP someone please
 
Reply
Old Nov 9, 2010 | 05:46 PM
  #2  
Woody35's Avatar
Diesel Bomber
Joined: May 2008
Posts: 2,856
Likes: 124
From: PA
Default

get a tune and up the boost to 15 psi and maybe get some water meth
 
Reply
Old Nov 9, 2010 | 06:56 PM
  #3  
65fourwheeler's Avatar
Thread Starter
|
Diesel Fan
Joined: Nov 2010
Posts: 11
Likes: 0
From: niagara falls, ny
Default

oh i forgot i got a 40 hp chip in it 2 and whats water meth?
 
Reply
Old Nov 9, 2010 | 07:01 PM
  #4  
Crazy's Avatar
Diesel Bomber
Joined: Sep 2010
Posts: 1,322
Likes: 51
From: Reddick,Fl.
Default

put inter cooler on
time the pump -1.94
maybe do OS bump not sure if it will do anything
 
Reply
Old Nov 9, 2010 | 08:10 PM
  #5  
65fourwheeler's Avatar
Thread Starter
|
Diesel Fan
Joined: Nov 2010
Posts: 11
Likes: 0
From: niagara falls, ny
Default

ok but the timing would help? is the os bumb a opitcal senser? and how do u do it?
 
Reply
Old Nov 9, 2010 | 10:11 PM
  #6  
Crazy's Avatar
Diesel Bomber
Joined: Sep 2010
Posts: 1,322
Likes: 51
From: Reddick,Fl.
Default

Yes the OS is Opitcal

Here link on it telling you how to do it

Stanadyne 6.5 Electronic Injection Pump

just scroll down to it
 
Reply
Old Nov 9, 2010 | 10:25 PM
  #7  
65fourwheeler's Avatar
Thread Starter
|
Diesel Fan
Joined: Nov 2010
Posts: 11
Likes: 0
From: niagara falls, ny
Default

have u done it 2 your truck cuz i herd it could make the engine "run away"
 
Reply
Old Nov 9, 2010 | 10:32 PM
  #8  
Crazy's Avatar
Diesel Bomber
Joined: Sep 2010
Posts: 1,322
Likes: 51
From: Reddick,Fl.
Default

No i have not yet done it but i am going do here in the week or two

i do have better right up on it with pics but just can not fine them right now i only had 4 hrs sleep in last 48 hrs i will post them tomorrow

What i have been told you only want move 1mm to the right no more
 
Reply
Old Nov 9, 2010 | 10:49 PM
  #9  
65fourwheeler's Avatar
Thread Starter
|
Diesel Fan
Joined: Nov 2010
Posts: 11
Likes: 0
From: niagara falls, ny
Default

ok i read all that ill give it a try but what would happen if u go past 1 mm? more power or hurting the engine?
 
Reply
Old Nov 9, 2010 | 10:53 PM
  #10  
Crazy's Avatar
Diesel Bomber
Joined: Sep 2010
Posts: 1,322
Likes: 51
From: Reddick,Fl.
Default

it run ruff what i had hear just make sure you make the OS before you move so thing don't go right you will know where t was at
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:21 AM.