Chevy 6.5 won't stay running
#1
Chevy 6.5 won't stay running
I've got a little hiccup Truck ran fine up until today around 1pm. I recently did a oil change I ran Wynns tuneup as I wanted to help clean the oil Changed the oil and filter and put stp high mileage additive in it. Drove approx 100 km this morning. Washed it and was on my way home when it started stalling Checked the oil it was low and not black at all I topped it up nd it started stalling again.
It has a pmd relocate. Has the egr codes with the egr line blocked off with a screw. I live in AB so I am running the shell v max diesel.
Any help appreciated
It has a pmd relocate. Has the egr codes with the egr line blocked off with a screw. I live in AB so I am running the shell v max diesel.
Any help appreciated
#5
Glow plugs will cycle a few times after startup "afterglow". After that controller shouldn't supply power generally if your glow plug light it is not on the glow plugs are not heating. Never heard a lift pump clicking although the lift pump relay will click on firewall I'd check all relays if your still stumped...post a video on YouTube and post web I'd here?
The following users liked this post:
geatgavi (12-25-2014)
#10
Wouldn't say lift pump makes a clicking noise wouldn't know how to describe it but you can't hear lift pump with engine running as op posted saying was happening but most likely thts what happened they ran lift pump power to a supply under the fuse box that is hot when key is on ..someone did that with mine before I got it but used a toggle switch...kinda dumb shouldve just bought a new ops
The following users liked this post:
geatgavi (12-25-2014)
Thread
Thread Starter
Forum
Replies
Last Post
ssmith.77
Chevy/GMC 6.2L and 6.5L
7
01-11-2015 02:03 PM
Fishy816
Chevy/GMC 6.2L and 6.5L
3
01-11-2015 08:31 AM