code 17
#1
code 17
I have a 94 chevy k1500 the pmd was moved to the top of the intake b4 i got the truck. The truck runs great when its cold and i first start it but a little bit af it warms up it runs like ****. The throttle. Gets really. Touchy if i just tap the pedal. It throttles up real hard the truck sputters when driving. And it trys to throttle up on its own. I was gona buy a new pmd and move it to the bumper but today it showed code 17
#3
Join Date: Oct 2012
Location: Scugog Island ONT.
Posts: 1,848
Likes: 0
Received 103 Likes
on
103 Posts
DTC 17 - High Resolution Circuit Fault
Possible fault with the electronic noise filter in the Optical Sensor harness?
Remove the filter and connect the remaining harness directly to the OS,also get enough ferrite core from radio shack so that you can put a piece on each OS harness wire.
Surging ect does still sound like a PMD or APP problem,could even be an IP issue,but get a new PMD and relocate the heatsink outside the engine bay-the intake is the worst location possible to fasten the PMD heatsink combo.
Possible fault with the electronic noise filter in the Optical Sensor harness?
Remove the filter and connect the remaining harness directly to the OS,also get enough ferrite core from radio shack so that you can put a piece on each OS harness wire.
Surging ect does still sound like a PMD or APP problem,could even be an IP issue,but get a new PMD and relocate the heatsink outside the engine bay-the intake is the worst location possible to fasten the PMD heatsink combo.
Thread
Thread Starter
Forum
Replies
Last Post
Saams69
5.9 Liter CR Dodge Cummins 03-07
5
07-20-2015 11:21 PM
flash7210
Diesel In Distress - Support Ticket
0
07-05-2015 09:25 AM
Backhoeman
Diesel In Distress - Support Ticket
0
01-03-2015 12:53 PM