I have spare factory shorty harness for the PMD, and want to extend it.

I left old PMD on the pump, still grounded to the top of the IP, and also blk/red still go to big rubber cover on the back of the IP and are connected there.

There are 4 wires left, can I just extend those?

Thanks

 

Yes,but do it right.Use at least as big as wire as it has now,solder and heat shrink.

 

Awesome, thanks man. Used larger wire and about 7ft run. Shrink wrap yes, but only crimped the wires inside butt connector. Should work

 

As long as you only extended 1 wire at a time-they have crossover so don't mix them up.

Also solder is the only way to go-you will curse the butt connectors very quickly.