Run truck on Transmission fluid?
#11
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
Yeah i started doing some snooping around and found the same idea. (mixing WMO with 15% gas) seems lagit plz shoot me a message when you have an update for me. ima start making some tonight ![Smile](https://www.dieselbombers.com/images/smilies/smile11.gif)
---AutoMerged DoublePost---
Lmao that guy has a DB9 and he is putting WMO in his land rover? foreigners are a trip
![Smile](https://www.dieselbombers.com/images/smilies/smile11.gif)
---AutoMerged DoublePost---
Lmao that guy has a DB9 and he is putting WMO in his land rover? foreigners are a trip
Last edited by chevyman0013; 11-16-2013 at 04:24 PM. Reason: Automerged Doublepost
#12
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
just an update for anyone who might care. I have run a 50/50 mix of Diesel/ Bio-Diesel and WMO,WTF. I have had no problems at all truck runs just as it used to.
No excessive smoke or anything like that.
I add 15% of Gas to My WMO. Then 50-50 mix it with the reg fuel in a settling tank. I let any water and crap settle out for about a week and drain out whats needed. Then filter through 5 micron filter. I will update after 5K Miles and that will be soon seeing how much Im driving!
![Hurrah](https://www.dieselbombers.com/images/smilies/JC_hurrah.gif)
![Thumbs Up](https://www.dieselbombers.com/images/smilies/tu.gif)
![Rockin'](https://www.dieselbombers.com/images/smilies/JC_rockin.gif)
#13
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
hey chevyman what kind of filter and housing are you using I have a 1/2 X 12 thread filter housing and the best I have found for it so far is 10 microns nothing smaller I have the tank all set up except for a fitting or 2 I will be using Compressed air to push it through the filter and I will be able to do 20 gallons at a time after draining the water off am st contemplating adding a water separator pre fuel filter
#14
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
OK I have an update on my filtration unit for WMO that I am building I had my NAPA guy doing most of the figuring for me on the filter and housing I have a Cat style 5 micron filter will have the part #s later but I will pick them up next Friday on half price filter day filter and housing for a little over $20 and I think that $20 should cover the rest of the materials involved Minus my holding tank
![Hurrah](https://www.dieselbombers.com/images/smilies/JC_hurrah.gif)
#15
#16
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
Quick update with my WMO unit that I am buliding today I picked up Napa PN 4759 and a 5 micron filter Napa PN1746 I wound up spending about double what I originally figured less than $40 for filter and housing the filter by it's self is $9 on filter Friday here are a few pictures of the unit it is 1 1/4 inch pipe thread fittings that are at any hardware store I am gonna use schedule 40 PVC to keep it simple and inexpensive well anyways enjoy
#18
#20