Chevy/GMC 6.2L and 6.5L Discussion of Chevy and GMC Trucks with 6.2L and 6.5L Diesel Engines

H E L P ! please ! surging idle

Thread Tools
 
Search this Thread
 
  #1  
Old 10-14-2013, 08:11 AM
jon c anderson's Avatar
Newbie
Thread Starter
Join Date: Oct 2013
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default H E L P ! please ! surging idle

guy brought me a 98 chevy suburan with motor locked up , i swapped a junk yard motor (complete) . had a very hard time getting motor to fire up and when it did it seemed to be running away (4-5k rpms) black soot out exhaust, so i shut it off. it did this about 3 times then finally now it will just rev up and down 2-3 k rpms. check engine light on now & will scan tonight , any one ever experence this ?

thank you for your time
jon anderson
229 456 6047 (call or text if you can)
 
  #2  
Old 10-14-2013, 03:07 PM
racer55's Avatar
Diesel Bomber
Join Date: Oct 2012
Location: Scugog Island ONT.
Posts: 1,848
Likes: 0
Received 103 Likes on 103 Posts
Default

Sticking fuel solenoid in the IP or faulty flight systems PMD?

Make sure it does not have a 5068 IP in that wrecking yard engine-the 5068 is only compatible with the 94 matching ECM.
 
  #3  
Old 10-15-2013, 06:03 AM
jon c anderson's Avatar
Newbie
Thread Starter
Join Date: Oct 2013
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by racer55
Sticking fuel solenoid in the IP or faulty flight systems PMD?

Make sure it does not have a 5068 IP in that wrecking yard engine-the 5068 is only compatible with the 94 matching ECM.
ok thanks , i did scan it found crank sensor code , switched it out with old engine , same code popped up. printed out diag chart found no 5v @ sensor connector. went to computer had 5v there , went to harness connector @ back of engine (smaller plug) found 5v @ term C checked other side of connector and found missing pin . found new junk tard motor harness different , swapped pins started perfect ! then it screwed up again , no codes , switched black box ( p m d ??? ) ran perfect !

thanks again for your time , ordering pmd and will let ya know
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
john grossman
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
01-12-2019 08:58 PM
boneheaddoctor
Chevy/GMC 6.2L and 6.5L
9
01-15-2016 06:19 PM
MechanicalDiesel
12 Valve 2nd Gen Dodge Cummins 94-98
5
08-11-2015 08:14 PM
cdetterer
5.9 Liter CR Dodge Cummins 03-07
15
12-08-2014 08:46 PM
JMC23
5.9L 24V Performance
3
10-28-2014 11:03 PM



Quick Reply: H E L P ! please ! surging idle



All times are GMT -5. The time now is 03:41 AM.