alot of air in bleed off valve on fuel filter
You probably need a fuel sending unit- be aware that the aftermarket sending units have poor quality strainer socks.
I would re use the old sock or remove it completely and use an inline fuel filter pre lift pump.
I would re use the old sock or remove it completely and use an inline fuel filter pre lift pump.
An inline fuel filter is what you would have on your riding lawnmower or snowmobile.
you would need to cut the fuel line and install it between the tank and the frame mounted electric fuel pump.
you would need to cut the fuel line and install it between the tank and the frame mounted electric fuel pump.
i think im going to stick to a stock one
---AutoMerged DoublePost---
are u talking about the tank sock?
---AutoMerged DoublePost---
o yea b4 i for get if i open the t valve the truck dies???
---AutoMerged DoublePost---
are u talking about the tank sock?
---AutoMerged DoublePost---
o yea b4 i for get if i open the t valve the truck dies???
Last edited by kylek; Dec 27, 2012 at 01:52 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
RatsMC
Chevy/GMC 6.2L and 6.5L
19
May 4, 2015 05:25 PM



so ill keep it that way , whats the part name that i need to get and does napa carry it, and how do i stop the fuel from coming out of the tank
