how do i ckeck my ignitio switch
#1
how do i ckeck my ignitio switch
Hi folks I have 95 GMC 1 ton 4x4 PMD went out i replaced it ! Now the WTS light or none of the other lights in dash isnt working ! Cleaned all the grounds and cables ..It cranks, headlighs and haards work ,but wont start and no turn signals . The only thing i can think of is the ignition switch or would the EMC cause the same effects ? Any help would be greatly appreciated
#5
no i dnt have a code reader ! i found ground for ECM under dash was lose thought that might have been it, but no such luck !
---AutoMerged DoublePost---
I took my first ride in 2 months !!!!! It is the ignition switch i took cover off botom of switch crossed red wire over to pink wire everthing started working fired right up !!!! thanks Mayhem for your help
---AutoMerged DoublePost---
I took my first ride in 2 months !!!!! It is the ignition switch i took cover off botom of switch crossed red wire over to pink wire everthing started working fired right up !!!! thanks Mayhem for your help
Last edited by bad1972; 08-18-2012 at 12:56 PM. Reason: Automerged Doublepost
#6
NP bad1972 I am a G.M. guy and I have had a buttload of G.M. vehicals myself and worked in after market part sales for a few years and I can't think of a time that I or someone needed a ECM for a G.M. vehical sold a few to people after they or a "mechanic for 20 year friend" and the ECM was never the problem I know nothing lasts forever but I have yet to run across a bad G.M. ECM ty
Thread
Thread Starter
Forum
Replies
Last Post
rstrange1996
12 Valve 2nd Gen Dodge Cummins 94-98
0
09-22-2015 01:25 PM
Cody Cain
Diesel In Distress - Support Ticket
0
12-21-2014 06:50 PM
IslanderXJ
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
12-17-2014 04:14 PM