Insulating Boost And Intake Tubes DIY...
#11
i was so close to doing that while i had my tubes out, but i was too lazy, and i spent a long time cleaning them too
#13
I have my intake done with Cool Tape from DEI. You will need two rolls though for 30ft.
Boost tubes will be done soon.....good job biggy !
Boost tubes will be done soon.....good job biggy !
The following users liked this post:
bigdaddydiesel (09-22-2008)
The following users liked this post:
bigdaddydiesel (09-22-2008)
The following users liked this post:
bigdaddydiesel (09-22-2008)
#16
ScramHD is right, it will take two of the 16ft rolls to do it right... However, I did not tape the boost tubes for lack of room, but it still helped IMO to ad the bedliner to them cause like I said before my avg egt's went down by about 150* they also fall MUCH faster when off the throttle! I mean, when I am going down hill at 65 the egts have actually dropped to 200* and this is on a trip where I have run most of the day in both city and highway traffic!!!