Hey all, long time since I've been on here.

Recently started my own automotive fabrication business and just received shipment of my CNC plasma table about a month ago. We have been hard at work making just about anything we can to recoup the cost of the table.

Check out some of the work we've done so far and let me know if you have any needs or projects you'd like to tackle, we can probably help!

Currently I'm selling sign and skid plates mostly. Still working on trying to get some rigs in my shop to model parts for.

If you have an 07-13 Chevy or GMC I can help you out with my custom skid plates for those trucks. Check out the photos of the skid plates and the other custom work we have spit out this past month.

If you need anything feel free to contact me via PM, at DirtRocketDesigns@gmail.com, or text or call my at 570 317 3464.

I also have access to a full size power coating booth and oven and can get any parts you could possibly want powder coated.









We can do any custom design you want in the center section of the plate as well as add extra side protection and other little bits you might need. Going to be sending a batch of 10 or so to the powder coater this weekend.








I will be rolling out a set of Cummins front license plates soon too if anyone is interested. Can be made from stainless steel, aluminum, or steel with paint or powder coat on them.

 

Nice

 

Some photos of my buddies plate after we got it powder coated.

 

Where are you located at? nice work! shipping?

 

We are located in Bellwood, PA. Yup we can ship to anywhere you're located!

Some more stuff we've been working on.

Had skid plates for 88-98 Chevy 1500s and 07-13 now. Check out that nice powder!




07-13 Chevy 1500s and 2500s(?) skid plates



07-13 Chevy 1500s and 2500s(?) skid plates



07-13 Chevy 1500s and 2500s(?) skid plates



07-13 Chevy 1500s and 2500s(?) skid plates



07-13 Chevy 1500s and 2500s(?) skid plates



07-13 Chevy 1500s and 2500s(?) skid plates



88-98 Chevy 1500 Skid Plate



Custom powder coated family crest and address sign we did for a customer!

 

I want a set on pucks to twist the 3rd gen manifd out like a 1st gen so the turbo will clear the trans cooler mounted to the side of the block . Leave enough thickness at the top for a 1/8th ntp thermal cupple for each cylinder. 1st gen square hole on one side and 3rd gen round port on the other.