turbo non turbo parts swap
#1
turbo non turbo parts swap
I have a 97 C3500 that I purchased it is a 6.5 Turbo with a bad bottom end. So the previous owner said I have been told and found info online that the motor in the truck is not a 97, either way I also purchased a complete running 96 6.5 Non Turbo. The previous owner of the truck said that he had redone the top end and then the bottom end went out.
I was thinking at the very least using the 96 as a short block, but the least I have to change over the better. But I will change what I need to make it right.
My question is : What all do I have to change ?
I have pictures of the truck and the pump off the good motor here >
Dually pictures from trucks photos on webshots
Any help would be greatly appriciated
I was thinking at the very least using the 96 as a short block, but the least I have to change over the better. But I will change what I need to make it right.
My question is : What all do I have to change ?
I have pictures of the truck and the pump off the good motor here >
Dually pictures from trucks photos on webshots
Any help would be greatly appriciated
#2
Thread
Thread Starter
Forum
Replies
Last Post
dpgcummins12v
12 Valve 2nd Gen Dodge Cummins 94-98
12
04-20-2015 10:24 PM
Whitereaper12v
Dodge Truck and Cummins Turbo Diesel Forum
0
01-28-2015 11:01 AM