Chevy/GMC 6.2L and 6.5L Discussion of Chevy and GMC Trucks with 6.2L and 6.5L Diesel Engines

Clacking sound from floorboard

Thread Tools
 
Search this Thread
 
Old Feb 11, 2011 | 01:07 PM
  #1  
piloto2's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2011
Posts: 33
Likes: 0
From: Central Texas
Default Clacking sound from floorboard

Whenever I turn on the key I hear a loud CLACKING SOUND which seems to be coming from the floorboard where the passenger's feet would be. It goes on for about 20 seconds, then stops. It starts clacking again when I turn the key off and runs for 20 seconds. I can't hear it as loudly listening outside the truck so it seems to be inside the truck. It might have something to do with the heater/ac system. Also, if it means anything, there is no vacuum pump on the engine.

Any ideas out there??
 
Reply
Old Feb 11, 2011 | 03:09 PM
  #2  
Crazy's Avatar
Diesel Bomber
Joined: Sep 2010
Posts: 1,322
Likes: 51
From: Reddick,Fl.
Default

maybe ball bearing in the heater cord

I can't think anything that should be running on that side of thr truck after key is shut off when fine what is lets know
 
Reply
Old Feb 11, 2011 | 05:14 PM
  #3  
2MuchJunk's Avatar
Diesel Wrench
Joined: Feb 2010
Posts: 831
Likes: 43
From: Wadesville IN
Default

There is a door in the heater box thats acting up. I cant remember if its the door or the actuator that goes bad.
 
Reply
Old Feb 11, 2011 | 05:21 PM
  #4  
Crazy's Avatar
Diesel Bomber
Joined: Sep 2010
Posts: 1,322
Likes: 51
From: Reddick,Fl.
Default

i don't think it will run with the key off i could be wrong i never had any problems with heater
 
Reply
Old Feb 11, 2011 | 06:39 PM
  #5  
2MuchJunk's Avatar
Diesel Wrench
Joined: Feb 2010
Posts: 831
Likes: 43
From: Wadesville IN
Default

They will do it for a little bit after the key is off. 95 and newer doesn't seam to have as many problems with the heater controls as the earlier ones do.
 
Reply
Old Feb 11, 2011 | 08:22 PM
  #6  
piloto2's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2011
Posts: 33
Likes: 0
From: Central Texas
Default

Any idea how to get to the heater box and/or actuator?
 
Reply
Old Feb 11, 2011 | 09:27 PM
  #7  
Crazy's Avatar
Diesel Bomber
Joined: Sep 2010
Posts: 1,322
Likes: 51
From: Reddick,Fl.
Default

littler hands just joking not sure
 
Reply
Old Feb 11, 2011 | 09:42 PM
  #8  
jcole's Avatar
Newbie
Joined: Feb 2011
Posts: 2
Likes: 0
Default

You can take the glovebox out an you may be able to get to it.if not you've got to remove the
dash an metal tube frame in front of your heater box.
 
Reply
Old Feb 11, 2011 | 09:50 PM
  #9  
piloto2's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2011
Posts: 33
Likes: 0
From: Central Texas
Default

I'll look over the job tomorrow when we get temps in the 60s. Thanks
 
Reply
Old Feb 12, 2011 | 12:12 PM
  #10  
Crazy's Avatar
Diesel Bomber
Joined: Sep 2010
Posts: 1,322
Likes: 51
From: Reddick,Fl.
Default

i also here you have to remove the driver seat because have drop steering and seat will be in the way
 
Reply



All times are GMT -5. The time now is 10:46 PM.