Big Rigs & Semis Discussion of Diesels Used for Transportation of Goods

Finally Made It.

Thread Tools
 
Search this Thread
 
Old Nov 11, 2007 | 01:02 PM
  #1  
dmaxjenn's Avatar
Thread Starter
|
IT'S A GIRL!
Joined: Oct 2007
Posts: 910
Likes: 158
From: Whistler BC
Default Finally Made It.

This job was booked for 7 hours, took us 21, the POS truck kept breaking down...... shoulda known when we first seen it.
We get to the job site and pull up beside the truck, before its even loaded and its already steaming out the rad.
then as its loading the cats up it slides out of control coming right at us... we ram it reverse and get the hell out of the way.. He just about wipes out 4 logging trucks as we start to head up hwy 99. theyre all on the radio freaking out.
We get half way up the duffy lake road 15% Incline and he breaks his drive shaft. next 6 hours we spend looking for parts..
next day driver says hes dizzy and wont be able to fix the drive shaft. so Devin fixes it for him. great we think , now hes going to fricken have a stroke or something... we get past lillooet and into litton and the truck starts heating up. look for water he says, this is just like the desert , theres no running streams... , so he calls us back sure enough, hes over heated. we have to go knock on peoples doors for water.. 4 times this happens..... till devin put some bolts in the fan , and made it run manualy, we finaly make it.took us 21 hours to get there..... long day....pictures on photobucket........ im sending this story to a truckers mag.... ( i have more pictures of the first part of the trip, but i have to wait till we get home to post them.).
 

Last edited by dmaxjenn; Nov 12, 2007 at 08:25 AM.
Reply
Old Nov 11, 2007 | 01:07 PM
  #2  
Whit's Avatar
Site Mascot
Joined: Mar 2007
Posts: 16,010
Likes: 940
From: Why-homing
Default

glad to hear ya got er done spite all the troubles..............sounds almost like a normal deal though...sometimes the harder ya try the worse things get


big cat in that pic........what does it weigh and how wide
 
Reply
Old Nov 11, 2007 | 01:09 PM
  #3  
dmaxjenn's Avatar
Thread Starter
|
IT'S A GIRL!
Joined: Oct 2007
Posts: 910
Likes: 158
From: Whistler BC
Default

there was two of them they were 18,000lbs each and 14 ' wide,,,
 
Reply
Old Nov 11, 2007 | 05:09 PM
  #4  
Cowboy_Customs's Avatar
Diesel Enthusiast
Joined: Mar 2007
Posts: 350
Likes: 10
From: Port Crane NY
Default

wow, now thats tight:
Name:  P1011184.jpg
Views: 103
Size:  106.1 KB

Im good, (so i have been told) but im not THAT good! And if I tried, id be sweatin bullets!



 
Reply
Old Nov 11, 2007 | 05:52 PM
  #5  
dmaxjenn's Avatar
Thread Starter
|
IT'S A GIRL!
Joined: Oct 2007
Posts: 910
Likes: 158
From: Whistler BC
Default

took him 4 times to get it right...
 
Reply
Old Nov 11, 2007 | 06:51 PM
  #6  
Whit's Avatar
Site Mascot
Joined: Mar 2007
Posts: 16,010
Likes: 940
From: Why-homing
Default

that bridge would be tough with the corner just before it ................damn
 
Reply
Old Nov 11, 2007 | 11:11 PM
  #7  
skynyrd's Avatar
Diesel Enthusiast
Joined: Mar 2007
Posts: 266
Likes: 8
From: harewood, md
Default

wow thats tight. my father drives a truck for the post office and gets into some pretty tight spots going into some of the smaller towns in western maryland
 
Reply
Old Nov 13, 2007 | 09:49 AM
  #8  
dmaxjenn's Avatar
Thread Starter
|
IT'S A GIRL!
Joined: Oct 2007
Posts: 910
Likes: 158
From: Whistler BC
Default

Yea that was a bad corner, its like a Z almost the corner on the upside was just as tight.
I added a few more pictures of the trip to my album.
Ready to go on the next one. The dmax was Awesome , got it all done up just for that trip.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ASarsano
Ford Powerstroke 2011-Up 6.7L
18
Dec 14, 2015 12:54 PM
Diesel Bombers
General Diesel Related
0
Sep 4, 2015 08:20 PM
Alaskabound
Diesel Bombers Introduction
5
Aug 27, 2015 06:42 AM
TyCarp
12 Valve 2nd Gen Dodge Cummins 94-98
0
Dec 10, 2014 11:10 AM
TyCarp
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
Dec 10, 2014 11:02 AM




All times are GMT -5. The time now is 10:07 AM.