anybody adding trans fluid to diesel
Oh and btw did you know that Ford owns Cummins?....
Last edited by Dr. Evil; Jan 16, 2012 at 01:18 PM.
Ok if you run a h/p fuel system it wont run on a high percentage of trans fluid. My truck will run 100% trans fluid with cetane booster. I run used trans fluid. And if you filter it a couple times enough of the foreign material is taken out. And I know I spelled that wrong. I know guys with 6.0l engines running 50%. If you do it right it doesn't do any harm.
When people say it is bad for a "modern engine".
Exactly what or when do you mean.
I run a 1985 4cyl Datsun/Nissan ute on wvo with a little diesel or upto 25% atf.
It is the indirect injection also called a swirl chamber design.
My fuel is heated in the fuel line to whatever temp the engine coolant is running, and I have electric heaters on the injector lines for start up.
But things don't get cold here in North Qld Australia.
At one time I did try the black diesel but I felt that it had too much black smoke, after all none of us want to stick out from the crowd when the cops are doing random traffic stops.
Exactly what or when do you mean.
I run a 1985 4cyl Datsun/Nissan ute on wvo with a little diesel or upto 25% atf.
It is the indirect injection also called a swirl chamber design.
My fuel is heated in the fuel line to whatever temp the engine coolant is running, and I have electric heaters on the injector lines for start up.
But things don't get cold here in North Qld Australia.
At one time I did try the black diesel but I felt that it had too much black smoke, after all none of us want to stick out from the crowd when the cops are doing random traffic stops.
so many people doubt all this stuff. if you filter it good it works great. the oil makes the cummins quiet down a bunch. i can prove to anyone it all works just fine. ive mixed about everything and not one problem from anyone of them
That may work OK in your 95, but I would not recommend it in a CR engine.




