lanz bulldog
#1
lanz bulldog
Hi guys,
i am after some performance tips that anybody can give me in regards to getting my Lanz Bulldog tractor to go a lot better in tractor pulls, some spec's are 10.25 litre cap, piston 227 Dia with a 260mm stroke, is a 2 stroke engine with the piston running horizontal, rpm is around the 700 mark, is hot bulb ignition with fuel being injected by atomiser, normaly run on crude oil but can be run on diesel with no problem, crankcase is only sealed with felt seals so pressurizing the crankcase too much is a problem, the compression ratio is only 5:1 and is very slow burning, also the piston weighs about 50 lb's, so i hope someone can give me some ideas, ie will nitros injection work?, or maybe some methanol in the fuel, water injection?, many thanks colin
i am after some performance tips that anybody can give me in regards to getting my Lanz Bulldog tractor to go a lot better in tractor pulls, some spec's are 10.25 litre cap, piston 227 Dia with a 260mm stroke, is a 2 stroke engine with the piston running horizontal, rpm is around the 700 mark, is hot bulb ignition with fuel being injected by atomiser, normaly run on crude oil but can be run on diesel with no problem, crankcase is only sealed with felt seals so pressurizing the crankcase too much is a problem, the compression ratio is only 5:1 and is very slow burning, also the piston weighs about 50 lb's, so i hope someone can give me some ideas, ie will nitros injection work?, or maybe some methanol in the fuel, water injection?, many thanks colin
#2