powerstroke chip
#1
powerstroke chip
I just had to install a new pcm in my 2001 powerstroke. now no matter how much i clean the contacts on the pcm my ts chip will not work. the truck wont start with chip installed. I can take the chip out and it fires right up. the new pcm is the exact replacement part and was programed by a ford dealer. is it possiable the chip does not match the pcm now? or is it possiable my something happened to my chip and thats what took out my pcm?
#2
#4
I'm betting what ever took out the PCM, also took out your chip. If your using a PMT, NVK, NMM or XLE PCM and your chip was programed for PMT it will work fine. The only way your chip would not work is if your new PCM is for a 2002 or newer.
And if that were the case your truck would not start.
Dont clean the contacts too much or you will have to have your new PCM retinned.
And if that were the case your truck would not start.
Dont clean the contacts too much or you will have to have your new PCM retinned.
#5
#6
The following users liked this post:
7.3STROKER01 (09-10-2011)
#7
Thread
Thread Starter
Forum
Replies
Last Post
Dieselhead1052
Ford Powerstroke 99-03 7.3L
0
11-26-2014 05:43 PM
Dieselhead1052
Ford Powerstroke 94-98 7.3L
0
11-26-2014 05:42 PM