twins
#1
#2
well first of all whats your main goal outta the truck? streetable system? towing, racing/sledpulling??
a ball park for injectors, i would look toward Ryan Casserly or Swamps.
as for kits Wop makes the best one. you can do it yourself for cheaper as i am.
i need more info before i can give more info.
a ball park for injectors, i would look toward Ryan Casserly or Swamps.
as for kits Wop makes the best one. you can do it yourself for cheaper as i am.
i need more info before i can give more info.
#4
What is your budget first off...
Whats your HP goal? ET goal?
What do you use your truck for? Towing? Drags? Sled Pulling? Work truck? DD?
If your not prepared to build the bottom end there is no reason to get a set of twins, a Modded H2e or a S-400 will support 600-700hp, about the limit for the stock bottom end (or a bit beyond...)
I assume your starting with the 99 in your sig... You will need a set of injectors, but what size and type depends on the HP and budget you set forth...
You may or may not need big oil...
What mods are done to the truck right now? is it a Auto or 6 speed?
There are alot of questions you have to ask YOURSELF before going out and building a truck.
#6
Plus 4K on a tranny, and 2-3k on the injectors to push the twins, and 2k on a HPOP system and 1k on all the little supporting mods... And maybe another 2k on a bottom end... and... and ,... and ...
Thread
Thread Starter
Forum
Replies
Last Post
12 valve 97
5.9L 12V Performance
21
01-27-2016 04:59 PM