I have a machine shop we have the equipment to follow thru with what im thinking of but id like to get some imput on this. I have a 61 Lincoln continental 4 door suicide.. I had bought some calipers off of a dodge srt-10 its the truck with the viper engine in it. it had big 16 inch brakes I was gonna make a kit to put these brakes on my Lincoln. I have since put the Lincoln on the back burner and am looking at these calipers. does anyone think it would be possible to adapt these to a 2002 f250?? I have never seen how the calipers in these trucks mount and I don't remember how the srt 10 mount I am gonna dig them out and take a picture to post. can some one give me their opinion on what might work and what might not and please give me a little back ground on the function of the f250 brakes are they static or do they slide? I guess if I were to make a braket to fit the caliper id be left with finding a rotor.. im not sure id use the dodge rotors as they seem a little thin from what I remember I think the rotors on the f250 are a lot beefier.. please chime in on this as much as possible!!