1994-98 Ram Diesel Fuel Shutdown Solenoid Adjustment
1994-98 Ram Diesel Fuel Shutdown Solenoid Adjustment
To check the fuel solenoid adjustment:
1. Turn the key on but do not bump the starter
2. Get under hood and pull up the solenoid by hand (it will stay up when you let go).
3. Measure from the bottom of the solenoid mounting bracket to the top of the lever pin as shown in the diagram below.
4. The distance should measure 2.64 inches (slightly longer than 2-5/8" on standard tape).
5. If its not close, loosen the locknut on the solenoid shaft and turn the adjustment nut to get the correct distance.
Thread
Thread Starter
Forum
Replies
Last Post
RatsMC
Chevy/GMC 6.2L and 6.5L
19
May 4, 2015 05:25 PM
