As always ~ SAFETY FIRST!!

- Disconnect the Negative cable of your battery system.
- Chock the wheels and set the parking brake.
- Have a known good fire extinguisher close by.
- Have good lighting.
- Have a clean and orderly work area.
- Always exercise good working practice with your tools.
- Use safety goggles, gloves, masks, etc where appropriate.

so first off remove the grill

then i held up the cooler and marked the holes



the back side before




after cutting the holes put the cooler up where it is soupose to go and do a dry fit



I made brackets that plated that whole thing but i forgot to take pics




now your soupose to use a different intake manifold plate i made the stock one work

remove the crossover pipe and install the 90* intake horn



the throtle bracket would not fit with the new horn so i modified it to fit




with the bracket installed






other than that is was real simple

---AutoMerged DoublePost---

Final pics