How to make your non I/C truck an I/C truck*
13 Attachment(s)
As always ~ SAFETY FIRST!!
- Disconnect the Negative cable of your battery system. - Chock the wheels and set the parking brake. - Have a known good fire extinguisher close by. - Have good lighting. - Have a clean and orderly work area. - Always exercise good working practice with your tools. - Use safety goggles, gloves, masks, etc where appropriate. so first off remove the grill Attachment 43535 then i held up the cooler and marked the holes Attachment 43536 the back side before Attachment 43537 after cutting the holes put the cooler up where it is soupose to go and do a dry fit Attachment 43538 I made brackets that plated that whole thing but i forgot to take pics Attachment 43539 now your soupose to use a different intake manifold plate i made the stock one work remove the crossover pipe and install the 90* intake horn Attachment 43540 the throtle bracket would not fit with the new horn so i modified it to fit Attachment 43541 with the bracket installed Attachment 43542 Attachment 43543 other than that is was real simple ---AutoMerged DoublePost--- Final pics Attachment 43544 Attachment 43545 Attachment 43546 Attachment 43547 http://www.dieselforums.com/images/buttons/quote.gif |
All times are GMT -5. The time now is 07:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands