The Agony of Defeat
#11
yah, man i made it back to the great state of texas, that place aint big enough to hold my ***. i been running around like crazy since i got home. im in the middle of changing careers. friday(tomorrow) is my last day with Willis Express. so im gonna have alot of free time on my hands so i was actually gonna holler atcha and see when would be a good time for me to come up to whack the abomination out from under my hood.
#12
#13
#14
#15
one thing to assist in this take the back piece off first(actual cooler piece) and get it out of the way then the nut everyone fights is just right there in the open. the rear is easy use your 10 mm socket and rachet pull out all the bolts you can, think some are 8mm then get a short extension for the 15mm back bolts and it will come right out, actual easy and you dont have to fight any bolts use a pencil magnet to get the nuts and bolts also. Not very many people know you can do it this way and let me tell you its so much nicer and easier to do.
The following 3 users liked this post by kmkdiesel:
#16
The following 2 users liked this post by raptr85:
dodgeram082500 (07-25-2010),
ETXBlueRam (07-27-2010)
#17
Not a problem man it was a good excuse to take off work lmfao a bad day wrenching beats a good day workin to bad we didn't know how handy the chisel was going to be sooner glad to hear the temps down if it gives you any trouble just bleed it again. Now you got lots of room under the hood for other stuff lmao to bad someone didn't show up to show us how its done lmfao