pics of my 2011 6.7
#1
pics of my 2011 6.7
i figured id post some pics of my truck, picked it up about 2 months ago,
so far i got , banks intake, gdp intake, gdp grid heater delete, egr delete,ccv tube delete, 5" tbe with muffler, smarty me, airdog 165,
next mods , studs, springs, pushrods, cam, ported/ringed head, 100 hp nozzles
pics when i first got it
so far i got , banks intake, gdp intake, gdp grid heater delete, egr delete,ccv tube delete, 5" tbe with muffler, smarty me, airdog 165,
next mods , studs, springs, pushrods, cam, ported/ringed head, 100 hp nozzles
pics when i first got it
Last edited by 2011brokeblue6.7; 04-07-2013 at 10:06 PM.
#7
(Not my words but good ones).......
EMBLEM REMOVAL:
The best way to take emblems off is to use a heavy gage plastic scraper and a adhesive removal wheel, you can get the wheels at your local automotive paint supply store,....I have spent the last 20 years in the graphics business putting them on and taking them off and by far is the easiest way to take them off. i have done hundreds over the years.
use the plastic scraper and work it behind the emblem and push down hard and work it through it. and as you are working it, pry it away from the truck be careful you don't break it. ...it takes me less then 30 seconds to take one off.
the adhesive removal wheel will fit into your drill and you start from 1 side and it will roll the adhesive right off...it will NOT scratch the paint as long as the truck is clean before you start
The following users liked this post:
cummins05 (04-08-2013)
Thread
Thread Starter
Forum
Replies
Last Post
Strangeak
Diesel In Distress - Support Ticket
6
06-19-2015 11:07 AM
5.9Cumminsturbodiesel
6.7 Liter Dodge Cummins 07.5-12
9
11-06-2014 06:08 PM