Turning Up A '93
#11
#12
well ive been running mine to where the pump almost touches the intake, and havent had any problems. dont worry about too much, just move it an 1/8 of an inch. if you dont like it move it back.
if you get some pod injectors you will find that an 1/8 of an inch isnt enough.
btw i think an 1/8 of an inch is about 18-18.5 deg.
if you get some pod injectors you will find that an 1/8 of an inch isnt enough.
btw i think an 1/8 of an inch is about 18-18.5 deg.
#13
my next step is a p-pump just not happy with the limitations of the ve pump.
#15
#16
#19
Time to get an old subject goin again. To get the steel collar off the full power screw, Geno's says to take the whole assembly out of the back of the pump. What do you loosen up and take out, the jam-nut? How do you get that collar off without movin the screw? How far is a good place to go with the star-wheel? Thanks