I got my box of injectors out and started takin them apart to get the numbers off of them and was kind of disappionted cause I only found three sets that have a P in them all the rest have S in them. Here are the numbers with the p
dlla148p522
dlla158p617
dlla158p45

 

What is the size designated on the DLLA148 P552 nozzle? I'll look into the incline angle to see if it is close enough to use.

 

Those are the only ones that I have that dont say a size. I do see they are a 7 hole. They look pretty close to the same size as some other 7 holers I have one is a 7x.22 and the other is a 7X.255

 

No bueno, the incline angle on all of those nozzles are 180° off. The closest is the P522 nozzle from an 8.1L, but the injector is mounted on the driver's side of the head. I would not recommend using them.

 

Yeah that could be a problem....

 

Well crap!! Would it not run as good or would it actually mess somethin up? I would be puttin them in my 89 dodge that Im gunna be drag racing.

 

The incline angle is 180 degrees off, do you think that might not have an effect on the longevity of the engine if used?

 

yea but i thought you said the p522 were closer than that. i guess i misunderstood you

 

The cone angle would work, but the incline angle will not, sorry.

 

Alright good thing I only paid $3 for the whole box then