5.9L Rotary Performance Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps Related To Performance And Longevity

tractor injectors

Thread Tools
 
Search this Thread
 
  #31  
Old 05-19-2010, 09:42 AM
Budgreen's Avatar
Diesel Bomber
Join Date: Dec 2007
Location: Bedford OH
Posts: 1,352
Received 50 Likes on 47 Posts
Default

well? try it yet?
 
  #32  
Old 05-19-2010, 04:10 PM
RSWORDS's Avatar
BOMBARDIER

Join Date: Mar 2007
Location: Gloucester, VA
Posts: 11,159
Received 918 Likes on 537 Posts
Default

Originally Posted by 5.9Bronco...eventually
It has been done. I cant remember for sure where I saw it at. Probably dieselpowermag or something. I think it was either a pulling truck or a drag racer but they worked just fine. I think the guy had twins though
I saw that article, he was running John Deere injectors. And it did run just fine. For a top level pulling truck with LOTS of expert tuning.
 
  #33  
Old 05-19-2010, 04:34 PM
Smokem's Avatar
Diesel Bombers Sponsor
Join Date: Sep 2009
Location: Iowa
Posts: 391
Likes: 0
Received 46 Likes on 33 Posts
Default

4x0.33mm is 4x0.013", nozzle hone sizes for manufacturers use the Metric system. What are some of the DLLA, DSLA, and P numbers?
 
  #34  
Old 05-19-2010, 06:28 PM
RSWORDS's Avatar
BOMBARDIER

Join Date: Mar 2007
Location: Gloucester, VA
Posts: 11,159
Received 918 Likes on 537 Posts
Default

So they are close to a factory non-I/Ced injector. That makes more sense them being metric...
 
  #35  
Old 05-21-2010, 08:48 PM
smokin_93_cummins's Avatar
Diesel Fan
Thread Starter
Join Date: Dec 2009
Location: Illinois
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

Havent had time to try them yet the 4x.33 is dilla155s547. That makes sense that they are metric i knew the holes were too small to be .33". Thanks for the help!
 
  #36  
Old 05-21-2010, 09:12 PM
JBradley500's Avatar
Diesel Enthusiast
Join Date: Apr 2010
Posts: 220
Likes: 0
Received 13 Likes on 9 Posts
Default

If that's a 4x.013" injector that seems to be a good size. Probably would supply enough fuel for 350 rwhp without much trouble.

-mom
 
  #37  
Old 05-21-2010, 09:24 PM
smokin_93_cummins's Avatar
Diesel Fan
Thread Starter
Join Date: Dec 2009
Location: Illinois
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by JBradley500
If that's a 4x.013" injector that seems to be a good size. Probably would supply enough fuel for 350 rwhp without much trouble.

-mom
Haha I like the signature! I did some figure after findin out those are meteric numbers and the biggest i have a set of 4x.016" so i guess im gunna have to try those first
 
  #38  
Old 05-21-2010, 09:43 PM
Smokem's Avatar
Diesel Bombers Sponsor
Join Date: Sep 2009
Location: Iowa
Posts: 391
Likes: 0
Received 46 Likes on 33 Posts
Default

There's a few problems I for see, one most likely being S type nozzles, which won't work, also most will not be the correct spray angle. What you need to be looking for is DSLA145 P*** or DLLA45 P***, but this does not mean the incline angle on the nozzle will be correct either. If the application the nozzle came from is 12v with the injector installed on the passenger side of the head, and matches the numbers given earlier, it may work. If none do, I would strongly suggest not using them if you wish to prevent any ill results.
 

Last edited by Smokem; 05-21-2010 at 10:17 PM.
  #39  
Old 05-21-2010, 10:14 PM
smokin_93_cummins's Avatar
Diesel Fan
Thread Starter
Join Date: Dec 2009
Location: Illinois
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

I dont have any idea on what engines any of these were in and i havent looked at any of the numbers either. Thanks for all the information!! I didnt realize there was so much specific stuff i need to look at. If i do find some with the right numbers since im just using the nozzles i will have to have the pop pressure set at an injector shop wont I?
 
  #40  
Old 05-21-2010, 10:16 PM
Smokem's Avatar
Diesel Bombers Sponsor
Join Date: Sep 2009
Location: Iowa
Posts: 391
Likes: 0
Received 46 Likes on 33 Posts
Default

Yes, let me know some of the numbers you have and I'll see if I can help out.
 



All times are GMT -5. The time now is 01:23 PM.