Just purchased a used Super B turbo.Have enough pieces of Holset's to biuld a HX35/40. But it seems that the Borg Warners are more flexiable.Anyhow, now I'm assuming injectors are next on the list.Wanting more zip for around town,daily driver and towing my '67 Sport Fury to a show once in awhile.Need to get the p/s intercooler installed along with the turbo.Also a Denny's pin real soon. Might my stock injectors be upgraded enough for a few more pounds of torque?

 

I have a S300G 57/65/14, stock non intercooled sticks, power stroke cooler, and a stans 4 inch exhaust. I ran 297hp through an 727 auto. My injector pump is pretty much maxed. Those stock sticks will put as much fuel as the turbo would want.

 

You tranny is stock too right Richie? No aftermarket convertor?

Bill and KTA swear (ok so maybe more bill) that stock non-I/Ced sticks are good for 400HP with a REAL good tune.

 

My tranny was rebuilt about 45 k ago. The original owner had it rebuilt and in his notes he said it had a shift kit installed. The converter is stock but may have been torn down and checked. He kept notes of everything he did. It was his baby. His wife cried when I bought it. He bought a extended cab to replace it. I also agree that 400 is doable with a standard. I think Gearjammer91 on dtr got 400 out of his with a rag.