Injectors
#1
Injectors
Ok no bs here need numbers to back it up. What are the best injectors for a first gen. I have a factory motor. Nothing but exhaust and turned screws in the pump. I am going to put a powerstroke intercooler in and a cold air intake. I haven't decided between an exhaust side turbo upgrade or an hx-35, but one or the other is going to be put on. Either 14 or 16 cm just need some guidance. Let me know. Thanks
#2
Join Date: Aug 2008
Location: 11740W SR28, Redkey, IN, 47373
Posts: 33
Received 0 Likes
on
0 Posts
What are your HP and truck usage goals? All BS aside, you aren't going to work a 400HP 1stgen very hard. So if you're building a DD or a Toy then we can just send you to Schied or Budda for some proven 6X.016". If you're gonna tow with it, some 370's from New Era will make good usable power with some pump tuning.
#3
#4
Well see I am not sure I want to use the truck as a truck pulling a trailer. I would love to make it fast but in my case I need a truck not a hot rod. I am thinking 450hp but I know that will never work for a daily driver so maybe 350hp. I would love to have 350 hp and 700 ft lbs of torque.
#8
Ok no bs here need numbers to back it up. What are the best injectors for a first gen. I have a factory motor. Nothing but exhaust and turned screws in the pump. I am going to put a powerstroke intercooler in and a cold air intake. I haven't decided between an exhaust side turbo upgrade or an hx-35, but one or the other is going to be put on. Either 14 or 16 cm just need some guidance. Let me know. Thanks
#9
If your looking for a good mix of a truck to play and tow I think some 435's a s300 based turbo and a valet switch for towing along with the other supporting mods (gauges, fuel supply, and exhaust) would be a nice set-up.
#10