Fp sender came with my gauge setup

 

Joe at hellmann performance makes a nice fuel bowl delete outta of billet aluminum. Took about 10 min to install last night on my buddies 03

 

Anyone here try out that new Vulcan drawstraw V.

 

Ok it just shows removing a quick connect line off the top of the tank and I didn't know if I had to lower the tank for that. Thx

 

i kind of wanted to keep the the stock fuel bowl in the system for the heater. i plan on running bio in a month or two. will the AD return the warmed fuel back to the tank?

 

Fuel will still be returned from the cp3 through the stock return line so yes it does.

 

Am I correct that if my fuel system is stock and my pump is on the bottom of my fuel bowl that it does not recirculate the unsed fuel back to the tank.

 

Incorrect. There still is a return line from the cp3, fuel rail, injectors

 

I think am going to run it throught the fuel bowl just because I will be running b100. What do I have to do different to hook it up that way

 

How cold does it get where u live? B100 with or without the heater will gel... The heater only heats the little amount in the filter and as the cold fuel enters the housing all it can do is try to keep up. But glacier diesel sells the billet adapter for the back of the housing for the AirDog supply line and I'd also recommend his big line kist from the housing to the cp3.