ARP, HELP!!!!!!!!!!
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2011
Posts: 147
Likes: 5
From: Jefferson City, Mo.
ARP, HELP!!!!!!!!!!
Ok, I installed ARP headstuds one at a time and left the head on and have no leaks with the gasket. I had also ground down the rocker spacer where it would contact every bolt but the last one
So I took it back off and ground down the very back one. I put everything back on and no leaks.......so I thought, but now as I drive down the road the air that comes up the firewall is pushing oil over the whole top of the motor
Did I crack the spacer???? Is the gasket bad? I can't figure it out!!!!
---AutoMerged DoublePost---
I got the leak fixed, the gasket folded on me in the back when I put it back on but I did notice that my EGT's were at 125 degrees at operating temp when coasting downhill for a mile, is that normal???
So I took it back off and ground down the very back one. I put everything back on and no leaks.......so I thought, but now as I drive down the road the air that comes up the firewall is pushing oil over the whole top of the motorDid I crack the spacer???? Is the gasket bad? I can't figure it out!!!!---AutoMerged DoublePost---
I got the leak fixed, the gasket folded on me in the back when I put it back on but I did notice that my EGT's were at 125 degrees at operating temp when coasting downhill for a mile, is that normal???
Last edited by helton87; Sep 18, 2012 at 07:00 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
