ARP, HELP!!!!!!!!!!
 

Ok, I installed ARP headstuds one at a time and left the head on and have no leaks with the gasket. I had also ground down the rocker spacer where it would contact every bolt but the last one:argh:So I took it back off and ground down the very back one. I put everything back on and no leaks.......so I thought, but now as I drive down the road the air that comes up the firewall is pushing oil over the whole top of the motor:dang:Did I crack the spacer???? Is the gasket bad? I can't figure it out!!!!

---AutoMerged DoublePost---

I got the leak fixed, the gasket folded on me in the back when I put it back on but I did notice that my EGT's were at 125 degrees at operating temp when coasting downhill for a mile, is that normal???