Add another turbo and some Big Dawg Injectors

 

Wat turbo would go good with that 63-68-14 turbo. Would 200 hp nozzle be to big with twins.

 

200's would work great for twins. I would do either an S471 or S474

 

Wat are the sizes of them turbos

 

71mm and 74mm

 

With all this being said about turbo to injector ratio what's is to much on stock internals other then arp head studs were do you max on them

 

What internals specifically are you talking about? Just about everything is relative to how much boost and obviously hp you make, plus rpm's being turned. Every mod you add can bring out a potential vulnerability.

 

Im looking into getting a s471 my self for my hx35/40. Is my smarty, tst powermax 3 and 100 horse injectors enough fueling for this set up? when i put the tst on it took it to a new game on higher levels my turbo shot to 55lbs, backed the waste gate off as far as i could and got it set at about 40lbs but on the higher settings on the tst it can still climb past 40lbs id love to run it on the higher settings and have more boost but dont want to push hot air either. Now porting the hx35 a must to handle more fueling and will it? or find another top turbo?