Need more Power... Injectors???
#11
#13
OK. I put all sub levels to 5. I checked the wire tap. It may have had a loose connection. The connectors were slightly corroded. I am able to get more smoke. I also noticed my EGT's shot up more so I backed her down. Seems to be working a little better now. My tranny is starting to slip pretty bad so I think I should get that fixed before adding any more HP. I think i'll try stacking with a smarty next. If thats not enough then prob bigger turbo. Then who knows. Thanks
The following 3 users liked this post by mysterync:
#15
#16
#17
My tap wire did that on my ADR also.... you should either RE tap it and fill the tap full of di-electric grease or even better would be to get one of the plates that mount on top the VP and tap it with a special screw. Those are sturdy and don't break loose like wire taps.
Sent from my DROID3 using Tapatalk
Sent from my DROID3 using Tapatalk
#18
If you do choose to go with a Stealth Plate, which I also suggest, have a look a this:
https://www.dieselbombers.com/dodge-...e-install.html
https://www.dieselbombers.com/dodge-...e-install.html
The following users liked this post:
DieselWeasel (03-24-2012)
#19
If you do choose to go with a Stealth Plate, which I also suggest, have a look a this:
https://www.dieselbombers.com/dodge-...e-install.html
https://www.dieselbombers.com/dodge-...e-install.html
Great write up!! I would suggest using Di Electric grease though? Can't water still sneak down threads on the screw, or the screw corrode (steel)?
Sent from my DROID3 using Tapatalk
Last edited by DieselWeasel; 03-24-2012 at 06:38 AM.