My EGT's are never over 900. Maybe I have the wrong wire tapped. The VP is new so maybe the wires got turned around during install. I will also check the sub levels because I know they are not all on 5. Will get back

 

i dont think your comp is working right.

 

OK. I put all sub levels to 5. I checked the wire tap. It may have had a loose connection. The connectors were slightly corroded. I am able to get more smoke. I also noticed my EGT's shot up more so I backed her down. Seems to be working a little better now. My tranny is starting to slip pretty bad so I think I should get that fixed before adding any more HP. I think i'll try stacking with a smarty next. If thats not enough then prob bigger turbo. Then who knows. Thanks

 

Lol

Sent from my DROID BIONIC using Tapatalk

 

Smartest thing I've read all day

 

Don't waste your money on a Smarty. You already have plenty of fuel. You need a Turbo.

Luke

 

My tap wire did that on my ADR also.... you should either RE tap it and fill the tap full of di-electric grease or even better would be to get one of the plates that mount on top the VP and tap it with a special screw. Those are sturdy and don't break loose like wire taps.

Sent from my DROID3 using Tapatalk

 

If you do choose to go with a Stealth Plate, which I also suggest, have a look a this:
https://www.dieselbombers.com/dodge-...e-install.html

 

That's what its called. Lmao! I forgot the name!

Great write up!! I would suggest using Di Electric grease though? Can't water still sneak down threads on the screw, or the screw corrode (steel)?

Sent from my DROID3 using Tapatalk

 

So if I were to upgrade the turbo, what would be a good upgrade with my mods. Without breaking the bank of course. I'm reading alot about the hybrids.