if you need one of those s480's let me know. I was thinking about one for my truck, but I dont need one that big. I need a set for towing not competition.

 

A 7x.012 injector with .015-.020 lift would work nice with the pump.

 

i know this is an old thread but i just found it
anyway here is what happens to a stage 2 monster pump with the wrong injectors.
i run the stage 1 monster pump on mine and it is very streetable and flows plenty of fuel for me. just make sure you run the right injector with them.

 

Home - call the builder directly and talk to him. I have a Monster stageII, with the matching injectors and the truck hauls I DO NOT have the pump wire tapped and so far I dont think I will unless Im going to dyno the rig.

vids, dyno sheet?

 

Of course, There's some video's on here, and there's one on my website , it's closer to then end, Right after John P's runs.

I'll post up some dyno sheet's there pictures of them...I dont have a scanner. I did 836 and 1500+ on the Dyno jet, then same tuning on a Mustang made 765 and 12 somthing tq on a mustang and with some tuning pulled 839 with 13 somthing tq.

It's on one sel. with a .93 pill

 

Here's these sheets, I'll see if I cant find my mustang sheets.
Heck...If I went on a dynocomm I could probably make 1800 just kidding!

Fuel only 593... Thats those 8's for ya!

 

SAWEET!