Chip worth it?
#13
What would you recommend?
---AutoMerged DoublePost---
So would something like this bee needed - 47RE Dodge Cummins Single Disc Billet Torque Converter | eBay ?
or something more like this - 47RE Dodge Cummins Triple Disc Billet Torque Converter | eBay ?
and for valve body... is ATS any good or BD?
---AutoMerged DoublePost---
So would something like this bee needed - 47RE Dodge Cummins Single Disc Billet Torque Converter | eBay ?
or something more like this - 47RE Dodge Cummins Triple Disc Billet Torque Converter | eBay ?
and for valve body... is ATS any good or BD?
Last edited by muddnutt; 12-30-2011 at 11:03 PM. Reason: Automerged Doublepost
#15
#16
So I have a weird off topic question... Could I have a possible transmission issue cause around 45-55 the truck vibrates and my toms are aroun 1200-1500 when it happens. I was thinking I have slippage also cause when I rev it up alittle it actually seems like it takes a bit to get moving.... Or is it a diesel thing cause I'm not used to it...
#18
Ok, so here's a question for you. Around 45-55 my while rig shakes... And it happens every time, now when I down shift into 3rd or I go a bit faster, it eliminates the shake. So I was wondering if that is my tranny slipping or just underpower at the rpms(if that's possible).... Cause of so, I'll start saving for a new tranny and TC from ATS. Or if it's needs something little, cause I'm really curious as what's going on...
---AutoMerged DoublePost---
Sorry for the similar post. I wasn't paying attention.
---AutoMerged DoublePost---
Sorry for the similar post. I wasn't paying attention.
Last edited by muddnutt; 01-02-2012 at 11:54 PM. Reason: Automerged Doublepost
#19
sounds like you may have a bad ujoint causing the vibration.check them & replace if needed.but i agree the trans upgrade would be a good idea as soon as you can,even if it is for now just the vb&tq con.my trans held up well with a transgo kit installed for a couple of years.the extra line pressure makes a big diff.
#20
Yea, I'm actually in the mind set now just to not band aid it or delay it so I'm thinking to buy a nice tranny and then play with the engine with peace in mind knowing I won't blow a tranny...
And I also was playing around today and I decided to unplug the chip and when I drove it, I literally had no power.... Then when I plugged it back in, everything works fine just. NOw I'm throwing a code... Not sure which one but autozone will help me out with that tomorrow...
And I also was playing around today and I decided to unplug the chip and when I drove it, I literally had no power.... Then when I plugged it back in, everything works fine just. NOw I'm throwing a code... Not sure which one but autozone will help me out with that tomorrow...