i see on ebay stock injectors going for like $30 for a set of 6, and hp nozzles for around $200...well i was thinking could i get the used set and have the nozzles put on and sent out to flowed for cheaper than like ddp ones? jw any info would be great....thanks seth

 

Or you could just have myself or SDX build you a set from the start. I know I am cheaper than DDP and so is SDX and our work is better too.

What size are you looking for?

We are just "down the road" from you and i have a set of sticks you could try out if you wanted to stop by sometime.

Nick

 

oh prob about 150 extra, i haul my 24ft enclosed race trailer and i think it would help...think you could shoot me a pm with prices with what all you got. im gonna be making a hybrid turbo here soon a hx 35 with a hx40....let me know where you are located and all and ill see if i can make a trip up there in the future

 

I bought my 150's for less then $300 shipped. The diesel shop I uses charges $22 per injector to swap and set pop pressure. For about $400 - $450 you can get 150 injectors. Nozzles are cheaper to ship as well.

 

We are located in Mitchellville. Well just south of Mitchellville but not too far outside of Des Moines.

Nick

 

what would be a good set of injectors for a 2000 cummins with a s300 would like 500-600hp and pull a 25ft trailer with rock buggie on it

 

What S300 are you looking at? Typically a set of 150s or 175s will support a 64/71 well and is a reliable tow setup. in my opinion. Then again we have a customer that hasa a 11mm P7100 on his '00 with a set of 7*.012's and 0.015" lift that hauled our 25ft triple axle gooseneck and never saw over 1400* with a 64/71.

nick

 

i would just buy the whole injector from one of guys on here. i would also look into 7 hole injectors they are top injector right now thats what i am going with next. less smoke less heat than a 5 hole injector