rhino lining
#1
rhino lining
i looking a at white 98 24v its white and gray at the bottom it has some rust on the bottom and a little hole on the bottom of the door i was thinking about rhino-lining or that spary in bed liner in a can stuff just along the rocker panels but was't sure if this is a good idea or not i didn't no if anyone else has did this or had any advice on the subject pictures are welcome
#2
Diesel Bomber
iTrader: (1)
Yes there are a couple of trucks that I have seen that done. Some of them were in salt area's (NY,CO,MD) were the winter's are or salt water. If money is good then having a professional do it is the best .If not they have a roll on kit at pep boys. I would first make sure that the water that get's in the door can find its way out before you go and spray the lining on. So it doesn't rust from the inside out anymore you may want to take the inside trim off the door and do a inspection for rust.
---AutoMerged DoublePost---
You can also do the bumpers.
---AutoMerged DoublePost---
You can also do the bumpers.
Last edited by turbo20psi; 07-12-2011 at 07:26 PM. Reason: Automerged Doublepost
#4
#5
#8
#9