raptor fuel pump and lines?
#1
raptor fuel pump and lines?
so if i do a raptor 150 and 1/2" lines should i do a upgraded draw straw? im doint the banjo bolt upgrade on the injector pump aswell
---AutoMerged DoublePost---
oh and is it just a banjo bolt upgrade or is it a new fitting like a 90 that screws in?
---AutoMerged DoublePost---
oh and is it just a banjo bolt upgrade or is it a new fitting like a 90 that screws in?
Last edited by arobertson; 02-03-2011 at 11:58 AM. Reason: Automerged Doublepost
#3
#4
If u got the knowledge, do a sump instead so u dont run into the 1/4 tank crap. No matter what anyone says, u still run into the 1/4 tank fuel problem with a Draw Straw.... the sump eliminates that problem
DrawStraw™ V HiFlow
#5
I used the original Vulcan draw straw and on 1/4 pass boost launch the fuel would shlosh so much that sometimes i would loose fuel pressure becuase there was no fuel so this time around immma do a sump. I was worried about protrusion to cause im a lowered 2wd so imma heat and bend a piece of steel around the sump to protect it from the elements
Thread
Thread Starter
Forum
Replies
Last Post
HardLuck
Diesel In Distress - Support Ticket
0
06-24-2015 08:04 AM
ninetyoned250
1st Generation Dodge Cummins 89-93
3
03-01-2015 09:10 PM