yeah, not enough fuel. also, on the dyno we messed with the boost elbow, on a stock truck, the boost elbow made 40 less hp then it did with the stock elbow, now with a modded truck running a box, we saw a gain of 25 hp, just food for thought

 

Thx for all the input! I'll let yall kno what kind of boost im making with the injectors

 

Does a power puck have a boost fooler programmed in?

 

I have no clue... It was on the truck when i purchased it. I really want to invest in a edge comp but money is a little tight these days

 

I know my superchips flashpaq doesn't and so I plugged my waste gate and put a BD boost fooler on it. It used to smoke quite a bit when i got on it and now its barely noticeable and the power difference is noticeable too

 

What does the boost fooler do? and where does it go?

 

It limits the signal being sent to the ECM. At 23 PSI boost, i believe, the ECM will pull fuel back due to a "over boost", according to it. The fooler goes in series between your MAP sensor and engine harness.

 

^^^ ^^^

My truck didnt make much boost... Then i clamped off the waste gate and added a Quad ADR... Then it made 40psi and really pissed of my head bolts!

 

I put a turnbuckle on mine, makes 35 psi with what is in my signature. But now wonder if need to be concerned with head bolts. If so, what would be safe psi, I can limit it with Ejw

 

You can limit boost with the EJWA. Head bolts fail at different boost pressures. Mine's been OK with 57psi, others come undone at 45.